MUMIC SOLID
High-Concentration Soluble Humic Acids for Improved Soil Fertility, Nutrient Efficiency and Crop Performance
MUMIC SOLID is a highly concentrated, fully soluble solid biostimulant obtained from Leonardite. It contains 85% total humic extract, including an effective balance of humic and fulvic acids, together with potassium in a highly soluble form. This composition facilitates rapid dissolution and efficient incorporation into the soil–plant system through irrigation, soil, root and foliar applications.
Designed to improve both soil fertility and plant performance, MUMIC SOLID supports nutrient availability, root activity and the efficiency of fertilization programmes. Its humic fraction contributes to better soil structure, water retention and cation exchange capacity, while its fulvic fraction promotes nutrient mobility and assimilation. The product also supports beneficial soil microorganisms and important physiological processes within the plant, helping crops maintain vigorous and balanced development throughout the growing cycle.
Composition and Guaranteed Analysis
Composition
%w/w
Citrus essential oils (Limonene)
7,00
Inert ingredients
93,00
| Composition | %w/w |
|---|---|
| Total humic extract | 85.0 |
| Humic acids | 74.0 |
| Fulvic acids | 11.0 |
| Potassium oxide (K₂O) | 11.0 |
Origin and Certifications
MUMIC SOLID is produced from Leonardite, a naturally occurring oxidised form of lignite recognised for its high concentration of biologically active humic substances. Its potassium form provides excellent solubility, allowing the product to be easily incorporated into irrigation water, soil treatments and foliar spray programmes.
The product is supplied as a concentrated soluble solid fertilizer and is intended for professional agricultural use. Certification, registration and permitted claims may vary depending on the destination market. Users should consult the current product label, local agricultural regulations and the corresponding technical or compliance documentation before application.
Multi-Benefits
MUMIC SOLID provides complementary benefits for the soil, root system and aerial part of the crop:
- Improves soil fertility and nutrient-holding capacity.
- Supports stronger and more active root systems.
- Increases soil water-retention capacity.
- Enhances the efficiency of mineral and organic fertilizers.
- Promotes the activity of beneficial soil microorganisms.
- Improves soil cation exchange capacity.
- Facilitates nutrient availability, mobility and uptake.
- Supports plant physiological activity and cellular respiration.
- Contributes to improved crop yield and harvested quality.
- Offers versatile use through soil, irrigation, root, seed and foliar applications.
Key Benefits
Better Nutrient Use Efficiency
Humic and fulvic acids interact with nutrients in the soil solution, helping retain them within the root zone and reducing the risk of inefficient nutrient use. This makes MUMIC SOLID a valuable complement to conventional fertilization programmes.
Improved Soil Water Management
The product supports the soil’s ability to retain moisture, which is particularly beneficial in sandy soils, soils with low organic matter and production systems exposed to irregular water availability.
Increased Cation Exchange Capacity
MUMIC SOLID improves the soil’s capacity to retain and exchange positively charged nutrients such as potassium, calcium, magnesium and ammonium, helping maintain a more stable and productive root environment.
More Active Soil Biology
Its humic substances provide favourable conditions for beneficial soil microorganisms, contributing to biological activity, nutrient cycling and long-term soil fertility.
Stronger Crop Development
By supporting root activity, nutrient assimilation and plant metabolism, MUMIC SOLID helps crops develop more consistently during vegetative growth and other periods of high nutritional demand.
Higher Yield and Quality Potential
Regular inclusion in a balanced crop programme can support improved productivity, uniformity and commercial crop quality.
Technical Advantages
- 85% total humic extract: Provides a high concentration of active humic substances.
- 74% humic acids: Supports soil structure, nutrient retention, cation exchange capacity and water-holding capacity.
- 11% fulvic acids: Helps improve nutrient mobility and availability within the soil–plant system.
- 11% water-soluble potassium oxide: Its potassium form contributes to the product’s high solubility and ease of application.
- Leonardite origin: A concentrated natural source of humic and fulvic substances.
- Fully soluble formulation: Suitable for fertigation, drip irrigation, sprinkler and pivot systems when properly dissolved.
- Low application rates: The concentrated formulation allows effective use at comparatively low rates.
- Multiple application methods: Suitable for soil, foliar, root-dip and seed-treatment programmes.
- Compatible with integrated nutrition strategies: Can be incorporated into programmes for horticultural crops, fruit trees, cereals, rice, forage crops, lawns and ornamental plants.
Dosage & applications
| CROPS | ASSOCIATES | MAXIMUM Nº OF TREATMENTS | LAST MOMENT OF APPLICATION | SPRAYING EQUIPMENT |
|---|---|---|---|---|
| Horticultural greenhouse and open-field crops | Sandy soil: 100–200 g/1,000 m². Clayey soil: 75–150 g/1,000 m² | Repeated applications | Every 15 days during the growth stage | Soil application or fertigation |
| Fruit trees: apple, citrus, banana and other fruit crops | Sandy soil: 200–400 g/ha. Clayey soil: 150–300 g/ha | Repeated applications | Every 15 days during the growth stage | Soil application or fertigation |
| Cereals, green beans and rice | Sandy soil: 800–1,200 g/ha. Clayey soil: 500–800 g/ha | 2–4 applications | During the active growth stage | Sprinkler or pivot irrigation |
| Fodder crops and alfalfa | Sandy soil: 1,500–2,000 g/ha. Clayey soil: 1,000–1,500 g/ha | Not specified | After every mowing during the growth stage | Sprinkler or pivot irrigation |
| Lawns | Sandy soil: 20–40 g/100 m². Clayey soil: 15–30 g/100 m² | Not specified | After every mowing during active growth | Sprinkler irrigation |
| Garden trees and shrubs | Sandy soil: 100–200 g/ha. Clayey soil: 75–150 g/ha | Not specified | Every four weeks during the growth stage | Trickle irrigation |
CROPS
ASSOCIATES
MAXIMUM Nº OF TREATMENTS
LAST MOMENT OF APPLICATION
SPRAYING EQUIPMENT
All crops
All approved agrochemicals
Follow the conditions established for the use of the associated agrochemical.
Follow the conditions established for the use of the associated agrochemical.
Suitable for use in various application techniques: Full coverage application, low volume concentrate, spray, pivot, and spray.
Vegetative nutrition
Authorized uses, rate and times of application
| CROPS | PRODUCT TYPES | ADJUVANT FUNCTION | WETTA FINAL CONCENTRATION |
|---|---|---|---|
| Foliar application | General biostimulation, improved nutrient uptake and enhanced fertilizer efficiency | 150–300 g/ha | |
| Root application | Supports root establishment and early crop development | 30 g/20 L water before transplanting | |
| Seed treatment | Supports germination and early seedling development | 200 g/100 kg seed before sowing | |
| Seed treatment | Supports germination and early seedling development | 125 g/100 kg seed before sowing | |
| Iron chelate enhancer | Enhances the efficiency of 6% iron-chelate treatments | 5–8 g per 50 g of 6% iron chelate |
GENERAL DOSE: Apply MUMIC SOLID through soil application or fertigation at the recommended rate according to the crop, soil texture and irrigation system. Use the higher rate on sandy soils and the lower rate on clayey soils. For foliar application on all crops, apply 150–300 g/ha. For root treatment, dissolve 30 g in 20 L of water and apply before transplanting. For seed treatment, use 200 g/100 kg of small seeds or 125 g/100 kg of large seeds before sowing. Repeat soil applications every 15 days, every four weeks or after mowing, depending on the crop and production system.
CROPS
PRODUCT TYPES
ADJUVANT FUNCTION
WETTA FINAL CONCENTRATION
All crops
Insecticides, Fungicides, Acaricides, Herbicides, Protection, Plant Growth Regulators, Foliar Fertilizers, Biostimulants
Dispersion and wetting
0,05-0,15% V/V
Dispersion, Wetting + Anti-rebound, Rewetting, deposition
>0,15->0,25% V/V
Dispersion, wetting + anti-rebound, rewetting, deposition + penetration
0,25 – 0,30% V/V
Features and Properties
MUMIC SOLID is a highly concentrated, fully soluble solid fertilizer and biostimulant obtained from Leonardite. Its composition includes 85% total humic extract, made up of 74% humic acids and 11% fulvic acids, together with 11% water-soluble potassium oxide (K₂O). This balanced concentration of humic and fulvic substances supports soil fertility, nutrient availability, water retention and cation exchange capacity, while its potassium form ensures rapid dissolution and efficient incorporation into the soil–plant system.
The product can be applied through fertigation, drip irrigation, sprinkler and pivot systems, as well as by foliar spraying, root treatment and seed treatment. Its high solubility and concentrated solid formulation make it easy to handle, transport and integrate into different crop nutrition programmes. MUMIC SOLID is available in 1 kg, 5 kg and 25 kg aluminium bags.
Recommended Crops and Timing of Application
Greenhouse Vegetables and Ornamentals
Apply through fertigation every 15 days during active vegetative and reproductive development. MUMIC SOLID is particularly useful where intensive fertilization requires efficient nutrient management and stable root-zone conditions.
Open-Field Vegetables and Potatoes
Begin applications once the crop is established and repeat every 15 days during the main growth period. Applications can be prioritised during root establishment, canopy development, tuber initiation and other stages of high nutrient demand.
Fruit Trees
Use in apple, citrus, banana and other fruit crops. Make two to four applications during the growing season, particularly at the beginning of root activity, after fruit set and during fruit enlargement.
Cereals, Rice and Legumes
Apply through sprinkler or pivot irrigation during active development. Treatments are especially relevant during establishment, tillering, canopy formation and periods when nutrient uptake must support rapid biomass production.
Forage Crops and Alfalfa
Apply after mowing or cutting to support regrowth, root activity and nutrient recovery before the next production cycle.
Lawns and Turf
Use through sprinkler irrigation during active growth, preferably after mowing. Regular applications can help maintain soil fertility, water-holding capacity and balanced turf development.
Garden Trees and Shrubs
Apply through drip irrigation approximately every four weeks during active growth. Adjust the rate according to soil texture, plant size and irrigation volume.
Transplants
Use as a root treatment before transplanting to support early establishment and improve contact between the young root system and the growing medium.
Seed Treatment
Apply before sowing to small or large seeds at the corresponding rate. Ensure uniform distribution over the seed lot and follow local recommendations regarding seed-treatment compatibility.
FAQ
What is MUMIC SOLID?
MUMIC SOLID is a fully soluble, high-concentration solid biostimulant derived from Leonardite. It contains humic acids, fulvic acids and water-soluble potassium.
What is the total humic extract content?
The product contains 85% total humic extract, consisting of 74% humic acids and 11% fulvic acids.
What is the difference between humic and fulvic acids?
Humic acids primarily act within the soil, supporting structure, nutrient retention, water-holding capacity and cation exchange. Fulvic acids are smaller and more mobile, helping facilitate nutrient availability and transport within the soil–plant system.
Can MUMIC SOLID be used through fertigation?
Yes. Its potassium-based formulation and full solubility make it suitable for drip irrigation, sprinkler irrigation and pivot systems when correctly dissolved and applied.
Is it suitable for foliar application?
Yes. The recommended foliar rate for all crops is 150–300 g/ha.
Can it be applied before transplanting?
Yes. For root treatment, dissolve 30 g in 20 litres of water and apply before transplanting.
Can MUMIC SOLID be used as a seed treatment?
Yes. Apply 200 g per 100 kg of small seeds or 125 g per 100 kg of large seeds before sowing.
Should the rate be adjusted according to soil texture?
Yes. Sandy soils generally use the higher rate because of their lower nutrient- and water-retention capacity. Clay soils normally require the lower recommended rate.
How often should it be applied?
Frequency depends on the crop. Greenhouse and open-field horticultural crops are generally treated every 15 days, garden trees and shrubs every four weeks, fruit trees two to four times per season, and forage crops or lawns after mowing or cutting.
Can MUMIC SOLID improve fertilizer efficiency?
Yes. Its humic substances help retain nutrients in the root zone, improve cation exchange capacity and support nutrient availability, making it a useful complement to mineral and organic fertilizers.
Can it be combined with iron chelates?
The datasheet recommends 5–8 g of MUMIC SOLID per 50 g of 6% iron chelate as an enhancer. A small compatibility test should be performed before preparing a full tank mixture.
Is MUMIC SOLID suitable for all crops?
It is recommended for a broad range of crops, including vegetables, potatoes, fruit trees, cereals, rice, green beans, forage crops, alfalfa, lawns, ornamental plants, trees and shrubs. Final use must follow the product label and local regulations.
Become our distributor
Fill out the form to obtain information about the distributors closest to your zip code.
