Product Type
Foliar nitrogen fertilizer with micronutrients
N-TONE
Foliar nitrogen fertilizer with three complementary N forms and Cu-Mn-Zn micronutrients for vigorous, balanced vegetative growth and recovery.
N-TONE is a liquid foliar nutritional solution based on three complementary and highly assimilable forms of nitrogen: nitric, ammoniacal and ureic nitrogen. It is enriched with copper, manganese and zinc to support balanced crop nutrition during periods of strong vegetative demand.
Its low biuret content makes it especially suitable for foliar application. The formulation is designed to provide rapid and progressive nitrogen availability, supporting uniform leaf development, plant vitality and balanced vegetative growth without inducing nutritional stress.
Technical Profile
Key product information at a glance.
Formulation
Liquid nutritional solution
Origin
Imported from EU
Key Composition
34% Total N · 9% N-NO₃ · 8% N-NH₄ · 17% N-NH₂ · Cu, Mn and Zn
Application
Foliar spray
Available Pack Sizes
1 L · 5 L · 10 L · 20 L · 1000 L
Composition and guaranteed analysis
| Composition | % w/v |
|---|---|
| Total Nitrogen (N) | 34.00 |
| Nitric Nitrogen (N-NO₃) | 9.00 |
| Ammoniacal Nitrogen (N-NH₄) | 8.00 |
| Ureic Nitrogen (N-NH₂) | 17.00 |
| Copper (Cu), water soluble — 1900 ppm | 0.19 |
| Manganese (Mn), water soluble — 13300 ppm | 1.33 |
| Zinc (Zn), water soluble — 13300 ppm | 1.33 |
Key benefits and agronomic effects
- Provides rapid and progressive nitrogen availability.
- Stimulates vigorous and balanced vegetative growth.
- Supports uniform leaf development and plant vitality.
- Helps prevent and correct micronutrient deficiencies.
- Supports crops during periods of high nitrogen demand.
- Supports nutritional recovery after stress periods.
How it works / Technical advantages
N-TONE combines nitric, ammoniacal and ureic nitrogen in one foliar formulation. These three complementary nitrogen forms provide a broad nutritional profile designed for rapid and progressive nitrogen availability during active vegetative development.
The formulation also supplies water-soluble copper, manganese and zinc. Its low biuret content is specifically highlighted for foliar use, supporting fast, uniform and balanced vegetative development.
Application rates and timing
Application Guidance: Apply as a foliar spray at 300-600 cc/hL. Adjust the rate according to crop condition, nutritional status and environmental conditions. Prioritize the start of vegetative activity, active or intensive growth phases and post-stress recovery periods.
Foliar application
| Crops | Timing | Dose | Notes |
|---|---|---|---|
| All crops | At the start of vegetative activity | 300-600 cc/hL | Adjust the dose according to crop condition, nutritional status and environmental conditions. |
| All crops | During active vegetative growth | 300-600 cc/hL | Adjust the dose according to crop condition, nutritional status and environmental conditions. |
| All crops | During intensive growth phases | 300-600 cc/hL | Adjust the dose according to crop condition, nutritional status and environmental conditions. |
| All crops | During post-stress or recovery periods | 300-600 cc/hL | Adjust the dose according to crop condition, nutritional status and environmental conditions. |
Additional technical information
Target problem / deficiency symptoms
N-TONE is intended for periods of high nitrogen demand, weak or insufficient vegetative development and recovery stages where rapid, balanced nitrogen nutrition is required. Its copper, manganese and zinc content also supports programmes aimed at preventing or correcting deficiencies of these micronutrients.
Mixing & compatibility
Compatible with most fertilizers and plant-protection products. A prior compatibility test is recommended before preparing a new mixture.
Precautions & storage
Avoid application under extreme temperature conditions. No specific storage conditions are stated in the source document.
Frequently asked questions
What is N-TONE?
N-TONE is a liquid foliar nitrogen fertilizer containing three complementary forms of nitrogen together with copper, manganese and zinc.
How much nitrogen does N-TONE contain?
It contains 34% total nitrogen: 9% nitric nitrogen, 8% ammoniacal nitrogen and 17% ureic nitrogen.
Which micronutrients does N-TONE contain?
It contains water-soluble copper at 1900 ppm, manganese at 13300 ppm and zinc at 13300 ppm.
What is N-TONE used for?
It is used to support vigorous and balanced vegetative growth, uniform leaf development, plant vitality and periods of high nitrogen demand.
When should N-TONE be applied?
Recommended timings include the start of vegetative activity, active vegetative growth, intensive growth phases and post-stress or recovery periods.
What is the foliar dose of N-TONE?
Apply 300-600 cc/hL and adjust the dose to crop condition, nutritional status and environmental conditions.
Why does N-TONE use three forms of nitrogen?
The formulation combines nitric, ammoniacal and ureic nitrogen to provide complementary and progressive nitrogen nutrition.
Is N-TONE suitable for foliar application?
Yes. Its low biuret content is specifically highlighted as making the formulation particularly suitable for foliar use.
Can N-TONE be mixed with other fertilizers or crop-protection products?
It is compatible with most fertilizers and plant-protection products, but a prior compatibility test is recommended.
Are there conditions in which N-TONE should not be applied?
Avoid application under extreme temperature conditions.
What pack sizes are available?
N-TONE is available in 1 L, 5 L, 10 L, 20 L and 1000 L formats.
Request product information
Interested in this product? Contact our team for technical information, availability, application guidance, quotations or distribution opportunities.
Use this form for:
- Product and technical information
- Application guidance
- Quotations and commercial enquiries
- Distribution opportunities