Product Type
Liquid multi-micronutrient deficiency corrector
TANGEL MIX MICRO L
Concentrated liquid Fe-Mn-Cu-Zn-B-Mo micronutrient corrector with EDTA for rapid uptake and correction of multiple crop deficiencies.
TANGEL MIX MICRO L is a concentrated liquid chelated micronutrient fertilizer containing boron, copper, iron, manganese, molybdenum and zinc. It is designed for foliar and soil application to prevent and correct multiple micronutrient deficiencies across a wide range of crops.
As a liquid alternative to EDTA powder products, it avoids dust, weighing and handling issues associated with powdered chelates. The formulation is designed for quick assimilation, practical tank preparation and flexible use across crop growth stages.
Technical Profile
Key product information at a glance.
Formulation
Liquid chelated micronutrient fertilizer
Key Composition
7.5% Fe · 5% Zn · 3% Mn · 0.65% B · 0.40% Cu · 0.20% Mo
Application
Foliar spray · Soil application
Available Pack Sizes
0.5 L · 1 L · 5 L · 20 L · 1000 L
Composition and guaranteed analysis
| Composition | % w/v |
|---|---|
| Iron (Fe) | 7.50 |
| Manganese (Mn) | 3.00 |
| Copper (Cu) | 0.40 |
| Zinc (Zn) | 5.00 |
| Boron (B) | 0.65 |
| Molybdenum (Mo) | 0.20 |
Key benefits and agronomic effects
- Corrects severe micronutrient deficiencies.
- Supports crop yield and quality.
- Provides six essential micronutrients in one liquid formulation.
- Supports quick and effective nutrient assimilation.
- Provides a concentrated liquid alternative to EDTA powder products.
- Offers practical handling with no dust, weighing or powdered-chelate mess.
How it works / Technical advantages
TANGEL MIX MICRO L combines iron, manganese, copper, zinc, boron and molybdenum in a concentrated liquid micronutrient formulation. EDTA is listed as the chelating agent and is intended to facilitate nutrient uptake and transport within the plant.
The source highlights high concentration for a liquid chelate, good tank-mix ability, a very safe formulation and rapid assimilation. The liquid format also simplifies storage, handling and mixing compared with powdered chelate products.
Application rates and timing
Application Guidance: Use the crop-specific foliar programmes below. The general foliar dose is 1-1.5 L/ha or 100-150 ml/100 L when symptoms appear. Although the product is also identified for soil application, the source does not provide a separate soil dosage.
Foliar application
| Crops | Timing | Dose | Notes |
|---|---|---|---|
| All crops | When deficiency symptoms appear | 1-1.5 L/ha or 100-150 ml/100 L | General foliar dose. |
| Horticultural crops | Begin when sufficient foliage is present | 75-100 ml/hL or 0.5-1 L/ha | 3 applications at 10-15 day intervals. |
| Fruit trees, vines, citrus and olive trees | At first bloom | 100 ml/100 L or 1 L/ha | |
| Fruit trees, vines, citrus and olive trees | After fruit set | 100 ml/100 L or 1-1.5 L/ha | |
| Cereals, field crops and industrial crops | During the crop cycle | 1 L/ha | |
| Potatoes and vegetable bulb crops | Starting at 10 cm of growth | 1 L/ha | 4 applications at 7-10 day intervals. Apply in a minimum of 500 L/ha of water. |
| Ornamental plants | At the beginning of the growing season | 75-150 ml/hL or 0.5-1.5 L/ha | 2-4 applications at 7-10 day intervals. |
Additional technical information
Target problem / deficiency symptoms
TANGEL MIX MICRO L is intended to prevent and correct deficiencies of iron, manganese, copper, zinc, boron and molybdenum. It is positioned for severe or combined micronutrient deficiencies where several essential trace elements need to be supplied together.
Mixing & compatibility
The source describes TANGEL MIX MICRO L as having good tank-mix ability. No specific compatible or incompatible products are listed in the technical document.
Frequently asked questions
What is TANGEL MIX MICRO L?
TANGEL MIX MICRO L is a concentrated liquid chelated micronutrient fertilizer containing Fe, Mn, Cu, Zn, B and Mo.
What is the composition of TANGEL MIX MICRO L?
It contains 7.5% iron, 3% manganese, 0.4% copper, 5% zinc, 0.65% boron and 0.20% molybdenum on a % w/v basis.
What is TANGEL MIX MICRO L used for?
It is used to prevent and correct multiple micronutrient deficiencies across a wide range of crops.
What is the general foliar dose?
Apply 1-1.5 L/ha or 100-150 ml per 100 L of water when deficiency symptoms appear.
How is TANGEL MIX MICRO L used on horticultural crops?
Apply 75-100 ml/hL or 0.5-1 L/ha in three applications at 10-15 day intervals, beginning when sufficient foliage is present.
When should it be applied to fruit trees, vines, citrus and olive trees?
Apply 100 ml/100 L or 1 L/ha at first bloom, followed by 100 ml/100 L or 1-1.5 L/ha after fruit set.
Can TANGEL MIX MICRO L be used on cereals and field crops?
Yes. Apply 1 L/ha during the crop cycle.
What is the programme for potatoes and vegetable bulb crops?
Apply 1 L/ha four times at 7-10 day intervals, starting at 10 cm of growth, using at least 500 L/ha of water.
Why choose the liquid formulation instead of a powdered chelate?
The source highlights easier storage, handling and mixing, with no dust, weighing or mess associated with powdered chelates.
Does TANGEL MIX MICRO L have good tank-mix ability?
Yes. Good tank-mix ability is specifically listed among the formulation characteristics, although individual mixture partners are not specified.
What pack sizes are available?
TANGEL MIX MICRO L is available in 0.5 L, 1 L, 5 L, 20 L and 1000 L formats.
Request product information
Interested in this product? Contact our team for technical information, availability, application guidance, quotations or distribution opportunities.
Use this form for:
- Product and technical information
- Application guidance
- Quotations and commercial enquiries
- Distribution opportunities