Product Type
Multi-micronutrient deficiency corrector
TANGEL MIX MICRO
Highly soluble Fe-Mn-Zn-B-Mo-Cu micronutrient fertilizer for correcting multiple deficiencies through foliar, soil, fertigation and hydroponic use.
TANGEL MIX MICRO is a highly soluble solid micronutrient fertilizer supplying iron, manganese, zinc, boron, molybdenum and copper. It is designed to provide several essential micronutrients simultaneously for a broad range of crops.
Except for boron and molybdenum, the nutrients are included in an EDTA chelate. The source states that this protects the nutrients in the soil and, when applied to leaves, facilitates their uptake and transport within the plant.
Technical Profile
Key product information at a glance.
Formulation
Highly soluble solid fertilizer
Origin
Imported from EU
Key Composition
7.5% Fe · 3.5% Mn · 0.7% Zn · 0.65% B · 0.30% Mo · 0.28% Cu
Application
Foliar spray · Soil application · Fertigation · Hydroponics
Available Pack Sizes
1 kg · 5 kg · 20 kg · 500 kg
Composition and guaranteed analysis
| Composition | % w/w |
|---|---|
| Iron (Fe) | 7.50 |
| Manganese (Mn) | 3.50 |
| Zinc (Zn) | 0.70 |
| Boron (B) | 0.65 |
| Molybdenum (Mo) | 0.30 |
| Copper (Cu) | 0.28 |
Key benefits and agronomic effects
- Corrects severe micronutrient deficiencies.
- Provides several essential micronutrients in one application.
- Supports crop yield and quality.
- Offers total solubility in water.
- Supports quick and effective nutrient assimilation.
- Uses EDTA chelation to facilitate nutrient uptake and transport for the chelated elements.
How it works / Technical advantages
TANGEL MIX MICRO combines six quantified micronutrients in a completely water-soluble solid formulation. Iron, manganese, zinc and copper are presented in an EDTA-chelated system; the source states that boron and molybdenum are the exceptions to the EDTA complex.
The chelating system is intended to protect the chelated nutrients in soil and facilitate uptake and transport after foliar application, making the product suitable for multi-deficiency programmes across field, forage, vegetable, fruit and specialty crops.
Application rates and timing
Application Guidance: Use the crop- and method-specific programmes below. TANGEL MIX MICRO can be applied by foliar spray, soil application, fertigation and hydroponics. Where the source lists foliar use but does not provide a numeric dose, the dose is left explicitly unstated.
Soil application
| Crops | Timing | Dose | Notes |
|---|---|---|---|
| Vegetables | Before sowing, transplanting or the beginning of plant growth | 5-10 kg/ha | |
| Olives | Before sowing, transplanting or the beginning of plant growth | 5-10 kg/ha | Timing reproduced as stated in the source. |
Foliar application
| Crops | Timing | Dose | Notes |
|---|---|---|---|
| Cereals, grain legumes, oilseed crops, cotton, maize and summer crops | Early season, tillering and bolting | 1-1.5 kg/ha | |
| Pastures, lucerne and forage crops | After each grazing or cutting | 1-2 kg/ha | |
| Potatoes and other tuber crops | From the 10 cm stage until post-flowering | 1 kg/ha | Up to 4 applications at 7-10 day intervals. Apply in a minimum of 500 L/ha of water. |
| Vegetables | When sufficient foliage is present | Not stated in source | Up to 3 applications at 10-15 day intervals. Apply in a minimum of 500 L/ha of water. |
| Grapevines, wine and table | During the crop cycle | Not stated in source | Apply 2-3 times during the crop cycle. Dilute application only. Do not exceed the maximum per-hectare rate. Minimum water rate: 500 L/ha. |
| Apples, pears, nut crops, citrus, mangoes, stone fruit, avocados and pineapples | During the crop cycle | Not stated in source | Apply 2-3 times during the crop cycle. Dilute application only. Do not exceed the maximum per-hectare rate. Minimum water rate: 500 L/ha. |
| Olives | When sufficient foliage is present | 0.5-1.5 kg/ha | Apply in a minimum of 500 L/ha of water. |
Fertigation / drip irrigation
| Crops | Timing | Dose | Notes |
|---|---|---|---|
| Vegetables | During the crop cycle | 2-3 kg/ha | Apply every 7-10 days. |
| Grapevines, wine and table | During the crop cycle | 2-3 kg/ha | Apply every 7-10 days. |
| Apples, pears, nut crops, citrus, mangoes, stone fruit, avocados and pineapples | During the crop cycle | 2-3 kg/ha | Apply every 7-10 days. |
| Strawberries | During the crop cycle | 2-3 kg/ha | Apply every 7-10 days. |
Other applications
| Crops | Timing | Dose | Notes |
|---|---|---|---|
| Vegetables | As required | 2-3 kg/1000 L | Application method: Hydroponics. Use 1 L of prepared solution per 100 L irrigation water. Use the higher rate during crop development, periods of high temperature or during shorter and cooler days. |
| Other berry crops | As required | 2-3 kg/1000 L | Application method: Hydroponics. Use 1 L of prepared solution per 100 L irrigation water. Use the higher rate during crop development, periods of high temperature or during shorter and cooler days. |
Additional technical information
Target problem / deficiency symptoms
TANGEL MIX MICRO is intended for correction of multiple and severe micronutrient deficiencies involving iron, manganese, zinc, boron, molybdenum and copper. It is designed for situations where several micronutrients need to be supplied together to support crop development, yield and quality.
Frequently asked questions
What is TANGEL MIX MICRO?
TANGEL MIX MICRO is a highly soluble solid multi-micronutrient fertilizer containing iron, manganese, zinc, boron, molybdenum and copper.
What is the composition of TANGEL MIX MICRO?
It contains 7.5% iron, 3.5% manganese, 0.7% zinc, 0.65% boron, 0.30% molybdenum and 0.28% copper on a % w/w basis.
Which nutrients are EDTA-chelated?
The source states that, except for boron and molybdenum, the nutrients are included in an EDTA chelate.
What deficiencies is TANGEL MIX MICRO designed to correct?
It is designed to correct multiple and severe micronutrient deficiencies involving Fe, Mn, Zn, B, Mo and Cu.
Can TANGEL MIX MICRO be applied foliarly?
Yes. Foliar programmes are listed for field crops, forage crops, tubers, vegetables, grapevines, fruit crops and olives.
Can TANGEL MIX MICRO be applied through fertigation?
Yes. The source provides fertigation programmes at 2-3 kg/ha for vegetables, grapevines, fruit crops and strawberries.
Can TANGEL MIX MICRO be used in hydroponics?
Yes. The documented hydroponic rate is 2-3 kg per 1000 L, with 1 L of prepared solution used per 100 L of irrigation water.
What is the foliar rate for cereals and other extensive crops?
Apply 1-1.5 kg/ha early in the season, at tillering and at bolting.
What is the foliar rate for potatoes and other tuber crops?
Apply 1 kg/ha up to four times from the 10 cm stage until post-flowering, at 7-10 day intervals.
Are foliar rates stated for vegetables, grapevines and the main fruit-tree group?
The source lists foliar application and treatment frequency for these groups but does not print a numeric foliar rate.
What pack sizes are available?
TANGEL MIX MICRO is available in 1 kg, 5 kg and 20 kg bags and a 500 kg big bag.
Request product information
Interested in this product? Contact our team for technical information, availability, application guidance, quotations or distribution opportunities.
Use this form for:
- Product and technical information
- Application guidance
- Quotations and commercial enquiries
- Distribution opportunities