TANGEL pH is a triple-action product designed to regulate the pH of spray solutions, improve foliar dispersion and provide a colour-based pH indication during tank preparation.
Depending on dose, the datasheet indicates adjustment of the application solution to approximately pH 4.5-6.5. Its surfactant effect reduces surface tension to improve wetting and spreading of pesticides and fertilizers.
Explore our pH correctors for agricultural spray solutions for spray-water conditioning and treatment preparation.
Key product information at a glance.
| Composition | % w/w |
|---|---|
| Total Nitrogen (N) | 3 |
| Ureic Nitrogen | 3 |
| Phosphorus Pentoxide (P2O5) | 15 |
TANGEL pH combines acidification, surfactant action and a colourimetric indicator in one product. The datasheet positions these three functions as a way to improve preparation and performance of phytosanitary treatments and foliar fertilizer applications.
Application Guidance: Dosages below are the quantities stated to bring 1000 L of solution to approximately pH 6. In hard water, increase the dose by 20%.
| Crops | Timing | Dose | Notes |
|---|---|---|---|
| All crops / spray solution with initial pH 7.0-8.0 | During spray-tank preparation | 400-600 cc per 1000 L solution | Target pH stated in the datasheet: approximately pH 6. |
| All crops / spray solution with initial pH 8.0-9.0 | During spray-tank preparation | 500-600 cc per 1000 L solution | Target pH stated in the datasheet: approximately pH 6. |
| All crops / spray solution with initial pH 9.0-10.0 | During spray-tank preparation | 600-1000 cc per 1000 L solution | Target pH stated in the datasheet: approximately pH 6. |
TANGEL pH is intended for spray solutions where pH adjustment is required. The datasheet states that its acidifying action can regulate the application solution between approximately pH 4.5 and 6.5 depending on dosage.
Fill the tank with a volume of water greater than the products to be added. Add TANGEL pH while agitating the solution, then add the treatment products and complete filling the tank before application.
In hard water, increase the stated doses by 20%.
What does TANGEL pH do?
It combines spray-solution pH regulation, surfactant action and a colour-based pH indicator.
What pH range can it help achieve?
The datasheet states that, depending on dosage, the application solution can be regulated between approximately pH 4.5 and 6.5.
How much TANGEL pH is needed for water at pH 8-9?
The datasheet gives 500-600 cc per 1000 L of solution to bring the solution to approximately pH 6.
How should TANGEL pH be added to the tank?
Add it to water under agitation before adding the treatment products, then complete the tank volume.
What should be done with hard water?
The datasheet recommends increasing the dose by 20%.

Natural non-ionic foliar adjuvant that improves spray coverage, wetting, penetration and absorption of foliar-applied…

Balanced 22-22-22 NPK gel fertilizer with trace elements for vegetative growth, fruit development, nutrient uptake an…

Crystalline potassium phosphonate with 58% P₂O₅ and 38% K₂O for P-K nutrition, systemic plant defense support, fruit …

Highly soluble Mn-Zn-Fe-Cu-B micronutrient corrector complexed with lignosulfonic acid for rapid uptake and preventio…
Interested in this product? Contact our team for technical information, availability, application guidance, quotations or distribution opportunities.
Use this form for: